Tmax 400 @ 1600 - 4800 in Caffenol-C-L

 

Hello again,

good news from the coffee. For the appearance of this Salsa rock band I needed a fast film but only had Tmax400 available. First tests in Caffenol-C-L from 200 to 800 ASA showed overexposed and overdeveloped negatives, EI 200 and 400 were so dense that they were practically unsuable. 800 was OK, but still quite dense. So I thought that EI 1600 would be possible at least, maybe more even if I reduced the dev time or temperature slightly.

The picture of the drummer is exposed at  EI 1600 and is very fine imho. The singer/guitarist was poorly lightened, so the same settings as in the first pic lead to EI 4800. Exposure for both was 2.8/60 with the fabulous Rokkor 2.8/135 mm lens for my Minolta SLR, of course using a tripod. Grain is still quite small for these speeds and base fog low for a fast speed film.

Developed semi-stand in Caffenol-C-L with 1 gramm per liter potassium bromide (KBr). 5 minutes prewash, 60 minutes development at 18-19 °C, agaitation 30 seconds continuous initially, 3 times after 2, 4, 8, 16 and 32 minutes. Still low base fog, perfect even development. For EI 1600 - 3200  I would probably prefer 20-21 °C and 60 mins. Maybe even EI 6400 is possible. Maybe lowering the KBr to about 0.5 g/l could help, but watch the base fog.

Best regards - Reinhold