March 2, 2010

Caffenol-C-M, recipe

Hi there,

so lets start the show with my basic recipe and some words about the ingredients. You already know that Caffenol-C is made of instant coffee, washing soda and vitamin-C.

All recipes are based upon 1 litre solution, measured in gramms and milliliter (ml, 1/1000 of 1 litre). No teaspoons allowed here! No ounces, inches, quarters, barrels, °F etc. I only use international standard units. In many households you will find small measuring mugs f.e. for doing the laundry. These will be usable if they have scales. A weight scale will be of course a bit better, but is not neccessary.

UPDATE: You can use volumetric measuring with Caffenol-C-M, but NOT with Cafenol-C-L, that will be introduced later. Using a scale is HIGHLY recommended for every recipe.

If you live in a country using not international standard units, you have to calculate the amounts yourself. Sorry! Now here we go:

Instant coffee: granulate (crystals) with lot of air included. Buy the cheapest brand you can get. More expensive ones might not be so good. Get the "strong" labeled version if possible. Not the "mild" ones. The active substance in coffee is caffeic acid, that behaves similar to pyrogallol and is a very compensating developing agent. I tried some cheapest brands here in Germany from Aldi, Lidl and other supermarkets. They all taste the same (awfully) and I guess they are all made by the same company or at least the same method. So it shouldn't be a problem to get reproducible results. 200 gramms for 3 Euro.

Vitamin-C: ascorbic acid, the second active developing agent. Works similar like Hydrochinone, giving more contrast and is hyperadditive to caffeic acid. Also reduces fog and of course developing time. Whenever possible, buy pure Vitamin-C, small crystals. Here I buy 100 gramms for 2-3 Euro, available in any pharmacy. Don't use vitamin pills or tablets, there will be other substances added and you might have to adjust the recipe. Buy only pure crystals for reproducible results. Used also in a famous commercial developer.

Washing soda: sodium carbonate (Na2CO3), waterfree (anhydrous). Be sure to get the waterfree one, white powder. If you should have crystals, it is not waterfree and I do not recommend it. You need much more and depending on the kind of hydrate you must recalculate differently. Soda is used for making the solution alkaline, that is important for activating the developing agents. Available at drugstores, supermarkets, zoo shops, swimming pool suppliers. Here at drugstores less than 1 Euro/500 gramms.

Recipe for 1 litre Caffenol-C-M, means for medium fast 100 ASA films (adjust yourself for other quantities)

1. 1 litre water
2. 100 ml washing-soda or 54 gramms
3. 16 ml vitamin-C or 16 gramms
4. 160 ml coffee or 40 gramms

Dissolve one after the other in the given order. Wait until each agent is dissolved completely. Stir while adding, especially the soda should be added slowly for good solution. I use tap water, no probs so far. The dissolving of the soda will heat the solution for about 3 °C. Keep that in mind for a proper temperature. Little fogging of the solution caused by the soda was no prob so far. When adding the vitamin-C small bubbles will appear, wait until they have cleared before finally adding the coffee. This is important! Then add the coffee, stir well and let stand the soup for about 5 minutes. The coffee needs some time to dissolve perfectly. Do not store, use within 1/2 an hour.

Develop for 15 minutes at 20 °C. Agitation first 30 seconds, then 3 times each minute. Intermediate rinse or stop bath, fix and rinse as usual. Tested with TMax100 and Fomapan100 so far. Other 100 ASA films may need slight adjustments. Not recommended for ASA 400 films or faster.

1 litre will cost about 1 to 1.20 Euro. Of course you will need less for developing 1 film, so depending from film and tank size, 1 development will cost about 30 to 60 Euro-Cents. Rodinal stand development will be much less expensive, but Caffenol-C competes well with commercial developers and the results are outstanding. No joke!

Image info: Pentacon Six with 2.8/80 Biometar and z-ring, KodakTmax100, exposed at exposure index EI 200 ASA, Caffenol-C-M. The image from the first "Hello"-post was made with Fomapan100 at EI 100 and the same soup, time, temperature.

More details and sample pics for Caffenol-C-M with the next post.

Important note for recipes: when I say "XYZ" I mean "XYZ" and not "ABC".

Now I need a cup of coffee.

Cheers - Reinhold

77 comments:

  1. Hi! the fix is b/w or color? The film is color but the result is b/w, so, which one?

    ReplyDelete
  2. Soda crystals are perfectly usable, the caveat is that you need 2.8x to account for the water in the molecules.
    Crystal soda can also be dries in the oven; in a pyrex pan at 120-150C for a few hours. If you can stir it once or twice is even better.
    And you might also have to filter the Ca cloud if your water is too hard; coffee filters work just fine.

    ReplyDelete
  3. just so you all know the proportions are by volume:

    1 part vit C
    6.25 parts soda
    10 parts coffee

    in water


    in weight the proportions are:


    1vitc:
    3.4soda:
    2.5coffee

    ReplyDelete
  4. And don't forget the 62.5 x (parts) water for both weight and volume ;-)

    ReplyDelete
  5. @ Juchiteca: Sorry for beeing late with my reply. Only my very first trial I made with C-41 colour film. Here I only introduced regular B/W films so far, because the results are much, much better. Anyway, both kinds need conventional B/W fixer.

    ReplyDelete
  6. so therefore from the quantities above.. for us americans that's

    1tbs vit c
    6 heaping tablespoons (tbs) of washing soda
    10 tbs of coffee in

    about 1000ml of water

    some conversions to be helpful
    1tsp = 5ml
    1tbs = 3tsp

    is my math correct??

    ReplyDelete
  7. I do NOT recommend this kind of measuring at all. What is a heaping tbs? It can be easily 2x or 3x the amount of a flat tbs depending on the spoon you use and how much you heap it. Leads only to confusion and anger in case of failure. Who is not able to measure 10, 20 or 100 ml should not develop films imho.

    ReplyDelete
  8. okay well then instead of 6 heaping tablespoons we can do an exact measurement of 6 tablespoons and 1 teaspoon??

    ReplyDelete
  9. Why make things complicated, uncomparable and unsafe? The easiest and sufficiently accurate method is to use a scaled mug, also a simple digital weightscale from your kitchen with 1 gramm resolution will provide constantly much, much better and comparable(!) measurings.

    ReplyDelete
  10. Congratulations on your endeavour. However I only see you mention scanning the resulting negative perhaps because "scanners love thin negatives". Could you perhaps show us some of your negatives for us to see how "thin" they are? Is the film leader (exposed to light when loading film) totally black and opaque? What if someone prefers "dense" negatives with strong contrast for comfortably long printing times with an enlarger, could they use your method and how? Thank you in advance.

    ReplyDelete
  11. Harrys pic is a scan from a wetprint. Depending on exposure you can get the negs as dense as you want ;-) The film leader is always as black as it can be. Expose any 100 ASA film at EI 200 and you will get fine fine wetprints.

    Optimizing the process for wetprints, if neceesary at all (?), will be the next to evaluate. I guess up to EI 400 with 100 ASA films should be no prob. Caffenol-C-M as shown here is a push developer with no drawbacks like bad shadow detail. Acros and EI 1600 might be unprintable but is scannable. We will see.

    ReplyDelete
  12. Hi, I just tried this recipe with an Agfa APX 25 - it ´s incredible! Works excellent, at least the negs look really good so far. Started from ISO 25 up to ISO 400 and amazingly the negs are all sharp even though the last ones with ISO 200 and ISO 400 are going to be a tiny little bit to dark when printed on paper. Can ´t wait the film to be dried to develop on paper . . .
    BTW, I did it just the way recomended in the recipe.
    This is the most fun I ´ve had in photography for quite a long time!

    ReplyDelete
  13. "This is the most fun I ´ve had in photography for quite a long time!"

    Thank you Anonymous, this is the best reward I got for quite a long time.

    ReplyDelete
  14. . . . referring to the correct measuring for the U.S.:

    54g = 1.9 oz
    16g = 0.565 oz
    40g = 1.41 oz

    The prints I developed yesterday on photographic paper were quite astonishing. This film developer sure does work! With the yesterday mentioned APX 25 I ´ve got great results at ISO 25, ISO 50 and - most exiting - ISO 125. I used Ilford multigrade paper (18x24 cm = approx. 7x10 in). Very sharp. I somehow can ´t believe this, so I ´ll be runnig more tests trying to reproduce those results. Next step is going to be the development of positives with this extraordinary recipe. Might need some adjustments in the quantities and time - and maybe it will work as well just the way it is. I ´ll keep you updated.

    ReplyDelete
  15. Righty right, works as a positive developer as well! Just got my first prints developed in Caffenol-C-M. Paper used was Tetenal Work, Grad 3. Pictures have that "old fashioned look". Instead of a clean white you get a, well what am I gonna call it - chamois perhaps. That is, it tends more towards a brown tone. Like those old pictures our grandparents used to show us. Quite nice, though - if you like it.
    Probably gonna do some adjustments next time. Maybe the soup did get to old, for I stored it about 1 hour or so on the shelf. But all in all - it works, yes, Caffenol-C-M is suitable as a positive developer!!!

    ReplyDelete
  16. Yep - works as a positive developer as well! Just got my first prints out of Caffenol-C-M. They do look a bit like they ´ve been toned already :-)
    Stay tuned, I ´ll keep you informed about all of the good news still to come . . .

    ReplyDelete
  17. Hi Anonymous,

    please send me a flickr-mail if you have an account. My flickr name is imagesfrugales.

    ReplyDelete
  18. I'm a blockhead :P
    I just asked the questions answered in this very post.
    So, now I just need to run to the next Aldi and Blokker and get the stuff... OMG, I'm really restless since I learned about this caffenol process...
    Sorry for not reading everything first.

    ReplyDelete
  19. Did my first T-Max 100 4X5s today in a slightly temperature adjusted Caffenol-C and the results are: WOW! :)

    I´ll post some results when I´ve scanned the negs!

    ReplyDelete
  20. Can any of you speak to how the development times change with temperatures higher (or lower) than 68F standard? Thanks.

    ReplyDelete
  21. Hi Neil, as any other developer, here's a nice chart:
    http://www.digitaltruth.com/devchart.php?doc=timetemp

    ReplyDelete
  22. As promised: http://i48.tinypic.com/o0o0mc.jpg

    Signs of uneven development in the top.. Still some quirks to work out!

    ReplyDelete
  23. Hi Fiatlux, look at the Apug forum for suggestions. Thanks a lot for feedback, very impressive image besides the uneven development.

    Cheers - Reinhold

    ReplyDelete
  24. how many rolls or how long ASA100 films could be developed by 1 liter caffenol?

    thxs.

    ReplyDelete
  25. Hi jumbo, all Caffenol devs must be used immediately, you should only mix as much as you actually need.

    ReplyDelete
  26. You mean 1 liter can be used to dev "only" 1 or, maybe 10 rolls 135 film?

    ReplyDelete
  27. @ jumbo: No! If you want to develop 1 film, mix the amount for 1 film! Maybe 250 ml or so. And use immediately and only once!

    If you want to develop 6 films at the same time in one tank, mix 1.5 litres. Caffenol, no matter what type, is a one shot developer and is discarded after 1 single use.

    ReplyDelete
  28. Does anybody used this recipy with FP4+? If yes what was the time?

    Thanks

    ReplyDelete
  29. The relevant difference between Arabica and Robusta coffees:
    Chlorogenic acid (CGA)
    Arabica 5.5-8.0%
    Robusta 7.0-10.0%

    Typical strong instant coffee is: 55% Arabica and 45% Robusta
    Gold coffee (freeze dried) is: 100% Arabica

    This means that in a given recipe 11% more freeze dried Gold type coffee is needed (for 1 litre that's 6 grams more coffee powder).

    ReplyDelete
  30. That's a very interesting detail. Chlorogenic acid is an ester of caffeic acid and has probably similar effects. Assuming that the amount of caffeic acid varies the same way, the difference isn't very big. Thank you, Anonymous, for this info - Reinhold

    ReplyDelete
  31. My second try with standard Caffenol-C-M, Kodak Tmax 100 developed for 13 minutes at 20°C http://www.christianseifert.net/?p=331 Many thanks to Reinhold for the great recipe. From now on Caffenol-C-M will be supersede my Calbe A49 developer.

    ReplyDelete
  32. Hello Reinhold, hello "coffenol fans"...

    I have tried today my first film...Fomapan Classic 100 with Coffenol-C-M...I shot it with old Olympus Trip 35 (new one to my old film cameras collection, so I wanted to test it).
    As it has just two shutter speeds ...and the light was quite poor, the film was totaly underexposed....After developing with Coffenol-C-M, 15 min., 20C, negatives were almost transparent..I even thought the film has not been even exposed.....but after scanning with Epson V600 and some postprocessing, pictures looks good (for this type of camera)...BUT ...after scanning, on all pictures there is a quantity of white dots...I first thought it is a dust...but I clean it, scan it and same...Have you anybody realized similar thing ? Do you filter Coffenol before using it finally ? Can this be something from coffe, or soda or C-acid ? I used some cheap coffe from Albert shop, standard Acid ascorbic (for use in jams, food etc) and washing soda (but they had just big granules)...I deluted all very well but can this be some micro-debrises from these ingredients ?

    Thank you for this great blog !!!!!

    Cheers
    Tomas B.

    ReplyDelete
  33. Hi Thomas,

    not caused by Caffenol imho. Of course you can filter the developer, if it makes you feel better. Like with any other developer, read a guide for proper developing, f.e. use destilled water and a drying aid like photoflow etc for the last rinse. NO SMOKING, smallest ash particles will settle on the film and also cause white dots.

    ReplyDelete
  34. Many thanks for the caffenol recipes. I just tried caffenol C-L with 120 TMAX100 and was very pleased with the results (1 hour stand development as per instructions).
    http://www.pbase.com/scho/image/131122482/original

    Scho

    ReplyDelete
  35. Reinhold - many thanks for your extensive work and investigation to publish all of this great information about Caffenol! I've spent some time reading through the entire blog, and yesterday tried my first development of TMAX 100 (120 rollfilm) with Caffenol-C-M.

    As a result, I have a beginner question for you, or anyone, if I may. Should Caffenol-C-M leave a mild pink stain on TMAX 100? That's what I'm noticing with my batch, and as it turns out, I must not have mixed up enough up for the 120 reel, because about 1 cm on one side of the film does not have this light stain and it looks like uneven development (I use a Patterson plastic tank, and perhaps due to the thicker nature of this developer vs. what I have used in the past - Diafine - it did not completely clear out of the center tube to cover the entire reel after agitating?).

    Thanks for any comments on this, and again, for generously sharing this information!

    Duane

    ReplyDelete
  36. Hi Duane,

    the pink stain has nothing to do with Caffenol. Tmaxes need longer fixing and/or rinsing than most other films, the manufacturers datasheet says 3 times the clearing time for fixing. I know that it's extremely uncool, but reading datasheets and instructions is extremely useful. Even after proper fixing there might remain a light stain that can be removed by extended rinsing.

    You also should read the data on the bottom of your tank for filling in the proper amount of liquids. If there should be uneven development, agitate more and develop with shorter time. If still uneven, add some kalium bromide (1g/l).

    Best - Reinhold

    ReplyDelete
  37. Reinhold - Thanks for your reply and suggestions. I can't believe I didn't read the TMAX datasheet; it was my first roll and it didn't even occur to me. Lesson learned!

    I actually mixed up 50ml more than is suggested for one roll of 120, but next time I'll add even a little more to try to ensure full coverage.

    Thanks again,
    Duane

    ReplyDelete
  38. hey everyone,

    bought some supplies and I am almost ready to go but I am a total newbie and I am trying to understand what is meant by...

    "Intermediate rinse or stop bath, fix and rinse as usual."

    - Is the intermediate rinse or stop bath water?
    - Is the fixer water or some other chemical?
    - How long do I leave each of these (stop batch, fix, rinse) in the container and do I agitate during these as well?

    much thanks!
    -AC

    ReplyDelete
  39. Thank you very much for your interest and welcome to the world of developing film yourself. Please understand that this can't be the place for a beginners guide. The web is full of tutorials and development with Caffenol is exactly the same procedure as with any other "regular" developer. Also public libraries are an excellent source for infos.

    Best wishes and good luck - Reinhold

    ReplyDelete
  40. Thanks so much for good recepie! Please.. does anybody know about products of development? I mean is stuff thrown away after developing toxic? Environmentally problematic?

    ReplyDelete
  41. Caffenol is environmentally safe and non toxic. Because all developers are alkaline you shouldn't get dashes into the eye or so. Treat it like your household detergents and it's OK. Most other developers contain toxic agents and basic precautions like wearing rubber gloves etc should be made. Used fixer is problematic because of the silver halides that kill urgently needed bacteria in seweage plants, rivers, lakes .... and should be disposed properly.

    ReplyDelete
  42. :( i see.. but that is inevitable? just the way fixing on film happens right..?

    ReplyDelete
  43. Yep, but if silver price rises more and more electrolytic recovery could be rewarding even for a hobby photographer.

    The easiest way is to put steel wool (not!! stainless) in the canister and the silver ions are exchanged against ferric ions. Search the web for more instructions.

    ReplyDelete
  44. looking forward to trying this. Thanks so much for posting; I've been looking for low-cost alternatives to regular chemicals for a while now!

    ReplyDelete
  45. This Recipe worked great for me !

    I had to work it out for a steel 400ml 120 developing tank which worked out to:

    400ml of distilled water

    21.6 grams Washing Soda

    6.4g Vitamin C (ground up Vitamin c pills in my
    electric coffee bean grinder.)

    16g Coffee (Folgers Instant-NOT decaf)

    5 minute pre-soak.
    15 minute develop. 30 second initial inversions.
    Thereafter-3 inversions per minute.

    Stop bath or water. 1 minute.

    Fixer 5 minutes. constant inversions.

    Hypo...ran out...oh well.

    Photoflow 2 minutes.

    10 minute rinse.

    Turned out great for Fuji Neopan 100.

    My experiments with 400 speed Kodak TMAX (Tmy-2) were heavily fogged with the normal Caffenol-C, BUT I had mixed the initial amounts of items with teaspoons and not grams. ALSO, be careful mixing the Washing Soda and Vitamin C, because the Temperature rises when you mix those. Mine raised nearly 10 degrees. So be ready to cool it back down to 20C/68F.

    I might just try 400 speed using the gram measurement and verifying the temp before beginning. I had skipped the temp step because I was so use to using Rodinal where the temp stays pretty much constant of your water. Not so with Caffenol. Watch for this gotcha.

    Thanks for posting this...

    -Greg H
    Racine, WI

    ReplyDelete
  46. Hi Greg,

    10 degrees temperature rise is quite suspicious, with the waterfree soda I see a rise of 3 °C. Hydrated soda has the opposite effect and can cool down the solution a bit.

    Caffenol-C-M as stated here many times before is NOT suitable for high speed films without adding a restrainer. The "M" means: for medium fast films of about 100 ASA.

    Cheers - Reinhold

    ReplyDelete
  47. Memorized the recipe a little bit wrong -

    Mixed it up as follows
    in 1l of water
    40g shitty instant coffee as prescribed
    16g Vitamin C
    100g (bit i memorized wrong) Sodium carbonate
    PH of 10.8 seemed a little bit alkali (most devs seem to hover around the 10.1 mark)
    Did a few clip tests for HP5+

    A little bit of base fog but nothing excessive dev for 10m at 20degress for some pretty tasty negatives.

    Next time I will bring the time down to 8.5mins as the negs were still a little bit strong.

    ReplyDelete
  48. Has anyone tried Caffenol without coffee ?

    Because with 16 gr Vit C per litre (8-16 times more Vit C per litre than the Gainer developers) and 54 gr of soda (2x the Gainer developers) I guess the coffée doesn't do anything else than change the colour of the developer.

    ReplyDelete
  49. Hey Anon,

    got a name? You're a real sly guy! How could I be so dumb? Caffenol without coffee, too bad it wasn't my idea.

    @ all: that's so far the funniest comment I got and therefore it will stay published for our amusement. No offending at all against Patrick Gainer, I highly appreciate his work.

    Dear Anon, simply try it without coffee, be sure I did!

    ReplyDelete
  50. Mixing traditional developers the ingredients are then diluted at maybe 1:1, 1:3, and the like. Is this the same with Caffenol or is it mixed then used as is. Searching the web did not answer my question.

    TIA

    ReplyDelete
  51. Undiluted. If it should be diluted furthermore, you would have read it ;-)

    ReplyDelete
  52. I just tried a roll of Tmax400 the roll itself may have been slightly overexposed, they developed without streaking in the original Caffenol C-M recipe/dev time. The exposures seem dark compared to exposures I've seen properly done. This is the first film I've ever developed. I've heard comments about shooting the film a stop slower (ISO 50 when box speed is 100) and developing. Is this useful or needed? Did I overexpose and overdevelop, is this darker image what you call fog? Would the mix with a little restrainer do for the regular 15min benchmark?

    ReplyDelete
  53. Hi Trevor,

    you probably overexposed and overdeveloped the film. The grey base of the negative indicates fog, the darker the base, the more fog. A restrainer, pot. bromide preferred, will keep the fog low, althiugh a little bit of fog is no prob at all.

    For boxspeed, try reducing the soda to 40 g/l and cut the dev time to 12 minutes. Less development -> less fog, smaller grain. Should work fine with Tmax400.

    ReplyDelete
  54. Reinhold,

    I spoke to one of the photo professors where I work, and he said as much concerning the overexposure and development. I think fog also played a big roll and my fixer didn't clear as well as it should have. Being my first film, I also wasn't sure of what to look for...

    Tonight I developed a second roll, this of Arista EDU 400, shot in a Contaflex Rapid. I made adjustments as you suggested and added 2.85g/l of iodized salt. I don't see any fog, I had some goofy spots, but that I attribute to my amateur film reel loading. I'm hoping to get in an scan the negs tomorrow, and will email you some of the files if you'd like. But where should I send them?

    Thanks for your help, I had not expected such fast and exact advise.
    Trevor

    ReplyDelete
  55. Hi Trevor, I hope you understand that I can't review other peoples pictures except the ones from guest authors that I like to publish here.

    You can always contact me via flickr, that's also a good place to share your pictures.

    ReplyDelete
  56. Hello there. Thanks so much for all your research and publishing this Caffenol C-M recipe. IT WORKS! I used this last week to develop a 5 foot test strip of BW negative super8 cine film.

    For anyone interested, the film was Argenti PAN-X APX100 BW negative. The coffee used was Coop FairTrade instant granules (Available in UK Coop supermarkets).

    Some details and a few images here... http://www.chrisgavin.com/2013/05/my-most-exciting-5-feet-of-film.html

    ReplyDelete
  57. following my last comment here.
    I've used this recipe to process short lengths of 8mm cine film twice now, with good results.

    Many thanks Reinhold for sharing this with us... It's thanks to you I made this short experimental film...
    https://vimeo.com/69736803

    ReplyDelete
  58. Hello, it's me again.
    I'm still using this caffenol C M recipe to process Argenti super 8 (8mm cine film B&W negative).
    I've now developed a DIY spiral tank so I can process an entire 50 foot load in one session. This tank requires 1 litre of Caffenol to immerse the film. If anyone is interested in this, I've documented the project (with some stills to show results) over on my blog here.

    http://www.chrisgavin.com/2013/07/diy-spiral-proccessing-tank-for-cine.html

    I'm thinking of tring some of the finer grain solutions next. On these tiny 8mm film frames, grain becomes a big factor :)

    ReplyDelete
  59. Quick question on the vitamin c conversion.
    It show 16ml equals 16 grams. Is this correct?
    There is a space in front of each conversion except the vitamin c where a "1" shows.
    Should it be 6 grams?

    Or does it only show like that on my browser?

    Thanks,

    Steve

    ReplyDelete
  60. Hi Steve, there was a space missing, fixed. So 16 gramms VC = 16 ml. At least for me ;-) You should always check with what you have in hands. But the C-C-M recipe is very, very robust.

    Best - Reinhold

    ReplyDelete
  61. Thanks for the response Reinhold.
    What a great site! Keep it going.
    Just bought a scale so I can follow the recipes.

    I have developed 3 rolls in caffenol-c on 2 different types of film. All came out dark as if stained black. (The film was not clear between frames nor on the edges). The images scanned ok.
    Did Indo something wrong or is that normal?
    Thanks,
    Steve

    ReplyDelete
  62. Steve, it's almost impossible to dig deeper here. We need to know so many things, f.e. which films you used, expired or not, exposure index, exact recipe (there are dozens of Caffenol-C recipes, 3 here alone) detailed developing parameters: time, agitation, exact temperature, sample pictures and so on and so on. Individual problems can't be solved via comments on a blog. Please visit the Caffenol group at flickr or ipernity or another place you trust.

    ReplyDelete
  63. I didn't think this was the proper place to get help, so I kept my question short.
    My experience is definitely not the norm from what I've discovered on other forums.
    My scale is on the way and will be making accurate measurements for my next brew as per your recommendation.
    Thanks Reinhold.

    ReplyDelete
  64. Thanks for this write-up. I developed TriX 400 using this formula with the following tweaks.

    At around 21°C
    10 grams of Vitamin C (all I had available)

    Results: Since this is one of few times I have developed my own film (this being my first with Caffenol) I have to say I acquired some decent results. Except that the negatives appear a bit washed out or lack contrast. I will see how they appear after scanning them.

    Cheers!

    ReplyDelete
  65. Hi Bert, without knowing at which exposure index (film speed) you made the pics I an't say anything. For EI 100 the 10 - 12 minutes might be fine, but it's long ago that I used a Foma 100 film. Just try it and make up your own mind. Not a big deal, huh?

    Btw, I don't like facebook.

    ReplyDelete
  66. Hi Reinhold, thank you for this recipe.
    I am new on this film thing. I tried on Shanghai GP3 film, it works well. :)
    Now, will this recipe works for Lucky SHD100 BW film too?
    thank you
    Gan

    ReplyDelete
  67. Yes it works, Gan, and see how it works :-)

    http://caffenol.blogspot.de/search/label/Lucky%20SHD%20100

    It's a pity that this film isn't available here anymore, same for the GP3.

    ReplyDelete
  68. Thanks a lot Reinhold for the Lucky guidance!
    :)
    *Gan

    ReplyDelete
  69. I tried my first caffenol development yesterday and was pretty impressed. I tried Caffenol-C-M with some Ilford FP4 in a Miranda Fv on a pretty dull day and got some reasonable results for my first attempt. Unfortunately I had a problem with my dev tank, but I'm certainly going to try again.
    Results I got are here http://simonhawketts.com/2014/11/15/fun-with-a-tank-of-coffee/

    ReplyDelete
  70. The active substance in coffee is caffeic acid, that behaves similar to pyrogallol and is a very compensating developing agent. I tried some cheapest brands here in Germany from Aldi, Lidl and other supermarkets.
    videographers shanghai

    ReplyDelete
  71. I found 4 undeveloped 110 films that must have been exposed around 30 years ago. Two iso200 and two iso100. Any suggestions on what exact recipe I should use and what adjustments I might need to make.

    ReplyDelete
  72. Hi Stephen,

    no warranty at all. Try adding 1 g/l pot bromide or 10 g/l iodized salt to c-C-M and 15 minutes at 20°C. Good luck.

    ReplyDelete
  73. I'm a bit confused. I looked at the density of Sodium Carbonate for volumetric conversation from standard caffenol-CM to the caffenol-CM(RS) version. Here you have listed 100mL(CC) of Sodium Carbonate being equal to 54g. But according to molecular density...
    2.54g/CC(mL) anhydrous
    2.25g/CC(mL) monohydrate
    1.51g/CC(mL) heptahydrate
    Or 1.46g/CC(mL) decahydrate.

    But 100mL being equal to 54g woukd put density at 1.852g/CC(mL) so Heptahydrate that's absorbed a little water through hydroscopy?

    Should I just use 40g which woukd be equal to 100mL?

    ReplyDelete
  74. Volumetric measuring can be very misleading especially with hydrated soda but also witht the other ingredients. Make the soda-heat test and use a scale

    ReplyDelete
  75. Excellent and helpful post… I am so glad to left comment on this. This has been a so interesting ..I appreciate your effort..

    ReplyDelete
  76. Which or what to use for stop bath and fixer? And can I use the same recipe for c-41 Fuji C200?

    ReplyDelete
  77. Hi Aditya, youtube is your friend for basic developing technics:
    https://www.youtube.com/results?search_query=caffenol+developing

    I don`t recommend to use c-41 films, especially not for very first trials. Use something easy to do, e.g. Agfaphoto APX 100 or any other 100 speed bw film from new production.

    ReplyDelete

comments welcome